EN
Nail surface preparation is the utmost important step to ensure duration of lasting top coating. Without sufficient preparation nail residue and oils create a barrier preventing firm adhesion of the gel, which accelerates subsequent chipping and peeling of the top coat. Top professional nail artists routinely use alcohol pads to wipe all nail surfaces to remove virtually all traces from the cuticles and natural oils to hand cream residue. Very meticulous nail surfaces create optimal nail surfaces so the Matte Top Coats can grab onto the nail better. To maximize all surfaces, nail technicians recommend roughening the nail surfaces with very fine grit, which can be achieved with the file. A nail salon owner identified that standard nail preparation and filing increased average wear time of matte top coat coating from 7 to 14 days. Without nail preparation, no matte top coat can be expected to last, so extreme caution should be exercised when selecting the top coat.
Select Quality UV LED Matte Top Coat
The quality of a matte top coat highly depends on the product itself. Not all matte top coats have the same quality, and the difference in the production standards and formulas can be huge. Natural resin ingredients are used in higher quality matte top coat products, and they provide a low odor, high hardness, and strong adhesive characteristics. Quality matte top coat products will be certified with EU REACH and U.S. FDA certifications, which will give users confidence in the safety of the product and give the product a stable performance in real world conditions. The 15ml UV LED matte top coat has gained popularity in salons for an easily even matte finish. Unlike cheap alternatives, which are thin in formula and may become glossy around the edges, buying a quality UV LED matte top coat will guarantee users a longer lasting solid matte finish and will save users time and money.
Mastering The Application Technique
Even with high-quality items, a poor application can ruin the longevity of a matte top coat. Remember to do thin layers and to seal the edges. Thick layers of a matte top coat are more likely to lift or chip since they take longer to cure. You’ll achieve a more durable finish with two thin layers. When applying the top coat, remember to seal the edge of the nail; this means brushing some top coat over the free edge. This prevents water and dirt from getting under the gel, which causes peeling. An 8-year experienced senior nail technician believes edge sealing is 90% of the matte top coat peeling issues. Don’t apply the top coat on the cuticles because it’ll lift off. Use a clean brush, and a separate brush, for each coat to avoid clumping.
Complete hardening of the UV LED matte top coat is reliant on the correct curing as well. A hidden risk of short wear time is the danger of incomplete curing. Each matte top coat has its own respective curing time. For example, with most standard UV LED lamps, each layer of matte top coat requires 60 seconds of curing. Soft top coats can be scratched or wear off easily, which is the risk of taking nails out before the complete 60 seconds. A professional nail salon will check the state of the top coat curing by touching the surface. If there is stickiness on the surface, then it needs more time. 24 seconds can be more of a cure, and can make the top look yellow or be brittled, which ultimately shortens the coat life. To achieve a hard coat, a new LED UV lamp with proper route is required.
Keep Your Nails Looking Fresh with Daily Care
Daily care is needed after the matte top coat is applied and cured because it will keep it looking fresh for weeks. Chipping the top coat or lifting the edges will occur if you use your nails to scrape things or open packages. Keep your nails looking fresh by wearing rubber gloves while doing the dishes and cleaning to avoid break the gel structure in the polish and water and cleaning chemicals. Hand cream will keep your skin healthy and but avoid rubbing it on your hands and the top coat because the oils in the cream will make the top coat glossy. The healthiest hand and nails will make the top coat last the longest because the gel will start to lift from the base and dry cuticles. Customers who come to the salon regularly and follow these daily care tips will be keep their matte top coat looking amazing for over 20 days.
Matte top cookie is liked for its modern and clean look and it is actually simple to make it last for a long time with a combination of correct prep, good products, good application, complete curing, and daily maintenance. While it may sound like a long list of things to do, anybody can achieve a long-lasting manicure with some simple step for both a home DIY manicure and for a professional nail service. Whether it’s for a salon business to enhance customer satisfaction, or personal use to get more enjoyment from a manicure, these pro nail tips are ideal for anyone who loves the look of matte nails.